Fermentation Tank

Model Number: SDT 8T-#6684 Brand Name: Sidolim Key Specifications/Special Features: SiDoLim in situ sterilizable fermentor (SDT 300L-1000L) system is a polite scale fermentor and designed for ease of useFermentor SDT 300L-1000LFermentor SDT (300L-1000L) is a large size pilot scale fermentation systems and the top driving mechanism is appliedHead plate lifting system by air cylinder and linear motion guide is adapted in standard specificationSystem can be used for microbial, insect and mammalian cell culturing proceduresStainless steel (SUS 316L) vessel and the whole attachments can be sterilized automatically or manually in this Pilot scale fermentation system and the whole fermentation procedures can be also performed automaticallyMeasured values of the procedures and monitored data are graphically displayed in the 8.5" color LCD screen and all the control parameters can be adjusted in the graphic mode Agitation Drive DC motor, AC gear motor
top drive (mechanical seal driving) Range 50-550 rpm Impellers turbine impeller(SUS316L)
foam breaker (SUS316L) Sensor magnetic hall sensor Control microprocessor based PID control Materials and finish Vessel using 316L stainless steel it is polished mechanically and electrically Piping 316L stainless steel prevent contamination and is polished O-rings/gaskets silicone material is used for the O-ring and the EPDM is used for gasket Sterilization built-in heater makers the in-situ sterilizing for the vessel, head plate, filter, aeration pipe lines and etc. in 105 ~130 temperature range automatically Temperature Range (°) from 3°C above the cooling water temperature to 80°C (accuracy 0.1°C) Sensor RTD (Pt-100) Control built-in heater cartridge raises and cooling water pulling downs the water temperature and water pump circulates the water inside of the jacket Aeration Sparer ring sparer (SUS 316L) Intel filter cartridge type sterilizable pleated type 0.2μm absolute filter specifications (optional item) Out filter same as internal filter specifications (optional item) Control range different vessel size and/or ordered specifications Pressure control back pressure is controlled manually and/or automatically Control unit Panel 8.5" graphic color LCD, membrane keypad Communications memory stick, printer, computer with the RS-232C communications protocol Controller board microprocessor based integrated controller board is adopted to measure, control and display the fermentation system