10/100Base-TX Fast Ethernet Media Converter with DIP&LFP Function

Model Number: OP-MC1DLM Brand Name: OPTOSTAR Key Specifications/Special Features: 1. OverviewThe media converter complies with IEEE802.3, IEEE802.3u, and IEEE802.3x Standards.It is designed to convert data signal between 10/100 Base-TX and 100Base-FX fast Ethernet.It supports 10/100Base-TX and 100Base-FX applications.The data signal converted by such high-performance media converter can be transmitted up to the 80Km maximum by fiber-optical cable.The Converter is equipped with one fiber optic connector (The same one connector for transmitting-TX and for receiving-RX) and two RJ-45 Jacks and one external power supply receptacle. Six LED indicators are built-in for easy diagnosing and monitoring the status of power, unshielded twisted paired (UTP) Link, UTP activity, fiber link, fiber activity, full duplex and data rates.It can be configured automatically for full duplex or half duplex operation.It is compact, cost-effective, low dissipative, high reliable and stable.It can be used in standalone applications, or rack-mounted applications where multiple media converter can be inserted into a rack-mount chassis (Up 10 units), and allowing all the converters to be powered by a single internal power supply.

2.2Appearance (Fig.2, Table2)

SET
1TP_force
2Speed_mode
3Duplex_mode
4Direct_wire
5Fast_FWD
6 LFPLink fault pass through]

3.DC jack and AC-DC power adapter
The DC jack’s central post is 2.5mm wide, it conforms to the DC receptacle (2.5mm) on the 19-inch converter rack slot or AC-DC power adapter.
AC-DC Power adapter:
AC Input: 85～265VAC 50/60Hz
DC Input: 36-72VDC
DC Output: 1A, +5VDC


4.Checklist
Before you start installing the converter, verify the package contains the following:

• The 10/100Base-TX to 100Base-FX

Ethernet media converter- --------×1

• The power line------------------------×1
• This user’s manual-------------------×1

Please notify your sales representative immediately if any of the aforementioned items is missing or damaged.

5.Installing the converter

5.1For as a standalone unit:
5.1.1Verify if the AC-DC adapter conforms to your country AC power requirement then insert the power plug
5.1.2Check the type of UTP (see fig.3)
UTP complies with IEEE802.3 standards and has two types: T568A T568B